Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stalk Switches on the Dacia Duster?

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: A/C controls

To replace the stalk switches on the Dacia Duster, remove the plastic cover surrounding the steering column and disconnect the connector of the part that can then be extracted. To extract the part, you will need to remove the Torx screws securing it to the steering column. Once the old stalk switches are removed, insert the new replacement part, securing it again with the same Torx screws. After the part is secured to the steering wheel, refit the plastic covers on the side and bottom of the column.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Indicator Stalk on a Dacia Duster
How to Remove the Indicator Stalk on a Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Have you encountered issues with the indicator stalk on your Dacia Duster? Follow this guide to disassemble it: disconnect the battery cables located…
How to Replace or Repair the Indicator Switch on a Dacia Duster MK1
How to Replace or Repair the Indicator Switch on a Dacia Duster MK1
Dacia Duster (2010-2017 / HS, MK 1) The indicator switch on the Dacia Duster MK1 is prone to chronic failure. The repeated movement of the lever causes the internal wire soldering to br…
How do you replace the speakers in a Dacia Duster?
How do you replace the speakers in a Dacia Duster?
Dacia Duster (2017-2024 / HM, MK 2) Replacing the speakers in a Dacia Duster is an operation that requires a bit of patience, but with the right instructions, it is within everyone's re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos