Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Check the Wear of Brake Discs on a Dacia Duster?

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Brake rotors

To check the wear of the brake discs, first lift the car using a ramp or jack. Once the car is lifted, loosen the bolts securing the corresponding wheel: by removing the wheel, the disc and its caliper will be visible. The front of the disc will have a minimum acceptable thickness, which in this case is 19.2 mm. If the disc has a thickness greater than or equal to this measurement, it is still in good condition. Otherwise, it must be replaced with a suitable new part.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Disc on a Dacia Duster?
How to Replace the Front Brake Disc on a Dacia Duster?
Dacia Duster (2010-2017 / HS, MK 1) To replace the front brake disc on a Dacia Duster, lift the car to access the bolts securing the corresponding front wheel. Once this wheel is remove…
How to Replace the Rear Discs on Dacia Duster
How to Replace the Rear Discs on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) Replacing the discs on the Duster? Let’s look at the disassembly of the brake discs. Lift the car with a jack to the desired height, remove the wheel…
Replacing Front Brake Pads and Disc on Dacia Duster
Replacing Front Brake Pads and Disc on Dacia Duster
Dacia Duster (2010-2017 / HS, MK 1) This video shows how to remove and replace the front brake pads and disc on a first series Dacia Duster. First, remove the front wheel by taking off …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos