Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Tyre Pressure Light on the Dacia Sandero

Model: Dacia Sandero B8 - Years 2012-2020
Part: Tire pressure warning light

In this video tutorial, you will learn how to reset the tyre pressure monitoring system (TPMS) light on the Dacia Sandero, including the Stepway version; before performing this operation, ensure all four tyres are at the correct operating pressure. Next, get in the vehicle and turn on the ignition by turning the key; now press the central button on the right stalk until you reach the TPMS option, then hold it down to reset the light. Now turn off the ignition and remove the key, then start the engine!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…
How to reset the TPMS light on the Dacia Sandero
How to reset the TPMS light on the Dacia Sandero
Dacia Sandero (2012-2020 / B8) When the TPMS light comes on in the Dacia Sandero vehicle, it means that the tire pressure needs to be adjusted. Before resetting the light, we need …
How to Reset the Tyre Pressure Warning Light on a Dacia Sandero
How to Reset the Tyre Pressure Warning Light on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) To reset the tyre pressure warning light on a Dacia Sandero, first, start the car. The warning light of interest is located on the left-hand dial. No…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos