Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD Port on the Dacia Sandero?

Model: Dacia Sandero MK 3 - Years 2021-2026

The OBD port has been mandatory for many years on all vehicles and is used by mechanics to diagnose faults in the electronic control units via reading systems. In fact, users can also use it to clear minor faults or reset warning lights that are difficult to turn off with traditional methods. By using a digital scanner that can be purchased for a minimal cost (around £90 to £100 on major e-commerce platforms) and a standard cable, you can clear faults without needing to visit a garage. Naturally, you need to know where the OBD port is located. It is usually near the footwell, but Dacia has chosen to install it in the glove compartment, as shown in this video.

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD Port on the Dacia Sandero?
Where is the OBD Port on the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Knowing the exact location of the OBD port on your Dacia Sandero is very important as it allows you to quickly connect a diagnostic tool if needed. I…
Where to Find the OBD Port on the 2017 Dacia Sandero
Where to Find the OBD Port on the 2017 Dacia Sandero
Dacia Sandero (2012-2020 / B8) If you own a second generation Dacia Sandero, particularly the 2017 model, you can use the following procedure to easily locate the OBD port of the v…
How to reset the service light on a Dacia Sandero vehicle
How to reset the service light on a Dacia Sandero vehicle
Dacia Sandero (2021-2026 / MK 3) To reset the service light on the Dacia Sandero, we must first perform the operations that include the service, such as replacing fluids, filters, ch…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the washer fuse located in a Dacia Sandero II? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos