Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to install an additional control unit on the Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Control unit
Operation: How to install an additional control unit on the Dacia Sandero

In this video, we can see how to connect an additional control unit to the Dacia Sandero. We can purchase this control unit on pedalsprint. com simply by selecting the brand and model of our car. In the simplest mode, it costs 169.00 euros - we have not found any information on shipping - and the installation on this car is particularly easy: first, we disconnect the negative pole of the battery, then we just need to disconnect the accelerator pedal and connect one end of the control unit in its place, while the other part is connected to the old plug. The control unit is placed in a position that is not bothersome and that's it. Then we connect to the control unit with our smartphone, where we need to enter some information, and once synchronized, it will show us some mappings. It also has another useful function, which is a kind of anti-theft device. The whole system is based on the way the throttle body opens, so the valve will open more quickly in sport and race modes; it does not change the horsepower of the car, it just makes it more responsive, and above all, it is something that can be reversed at any time: just remove two plugs.


Posted on 16 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Sandero 2008-2012 - What does the orange multifunction warning light on the Dacia Sandero mean? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos