Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Dacia Sandero

Model: Dacia Sandero BS - Years: 2008, 2009, 2010, 2011, 2012
Part: Tire pressure warning light

See other generations:
Video tutorial

First, resolve the issue that caused a loss of pressure in your car's tyres. Once the issue is fixed and the tyre pressure is restored, you can reset the tyre pressure light.

Go to the instrument panel and use the control lever located to the right of the steering wheel and press the button above the lever. Press multiple times until you reach the "SET TP" message.

At this point, after flashing, the message will disappear along with the orange light (the light is represented by two round brackets with an exclamation mark in the middle).


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Dacia Sandero
How to Reset the Tyre Pressure Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure light on a Dacia Sandero, first, get into the vehicle and close all four doors. Then, turn on the instrument cluster witho…
Resetting the Tyre Pressure Light on a Dacia Sandero
Resetting the Tyre Pressure Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Resetting the tyre pressure light on a Dacia Sandero is really a piece of cake, and now we will show you how. First, turn on the instrument panel (no…
How to Reset the Tyre Warning Light on a Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) This video explains how to reset the tyre warning light on a new generation Dacia Sandero. The light is yellow and located at the bottom right of the…

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos