Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on a Dacia Sandero Stepway?

Model: Dacia Sandero B8 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure light on a Dacia Sandero Stepway, insert the ignition key and turn it to power up the instrument cluster. Next, press the button located on the lever to the right of the steering wheel until the display shows the message "Set up". At this point, continue to hold the same button located at the end of the lever until the light on the cluster turns off. To verify that it has been reset correctly, turn off and then turn on the instrument cluster again.


Updated on 21 June 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on the Dacia Sandero Stepway?
How to reset the tyre warning light on the Dacia Sandero Stepway?
Dacia Sandero (2021-2026 / MK 3) In this tutorial, we will see how to reset the tyre warning light on the Dacia Sandero Stepway, a very simple and quick operation to perform only aft…
How to Reset the Tyre Pressure Warning Light on the Dacia Sandero Stepway?
How to Reset the Tyre Pressure Warning Light on the Dacia Sandero Stepway?
Dacia Sandero (2021-2026 / MK 3) The operation to reset the tyre pressure warning light on the Dacia Sandero Stepway is done by turning on the instrument panel and navigating through…
How to Reset the "Service" Light on a Dacia Sandero Stepway
How to Reset the "Service" Light on a Dacia Sandero Stepway
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero Stepway. Start by repeatedly pressing the button located at the end of the right ind…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos