|
Do it yourself
| |||
| ||||
How to Replace the Fuel Filter on a Dacia Duster 1.5 Dci
Model: Dacia Duster
HS, MK 1
- Years 2010-2017
Follow these steps to replace the diesel filter on a Dacia Duster 1.5 DCi: first, remove the front right wheel of the vehicle, then take off the wheel arch liner to access the fuel filter. Start by removing the metal protection, then disconnect the fuel hoses and the water sensor connector. Next, take the filter assembly to a workbench. You can find the new filter on various e-commerce platforms, for example on eBay for £33.03, including delivery. It is advisable to perform this work over a container, as some fuel will spill. Remove the 5 bolts on top of the cover and then the plunger at the bottom. Clean the filter housing thoroughly, remove and replace the O-ring on the top of the housing; insert the new filter and then refit with the 5 new bolts. Also replace the O-ring on the drain screw, then reassemble it in its base on the car, covering it with its protective cover. Refit the wheel arch liner and the wheel, and the job is complete.
Updated on 2 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Dacia Duster
(2010-2017 /
HS, MK 1)
Today, you will see how to remove the fuel filter from a Dacia Duster 1.5 DCi, following the steps outlined below. First, lift the front of the vehic…
Dacia Duster
(2010-2017 /
HS, MK 1)
Learn how to remove and replace the fuel filter on a Dacia Duster: lift the car on a column lift, locate the fuel filter (as shown in the video). Usi…
Dacia Duster
(2010-2017 /
HS, MK 1)
Today, in this short and simple guide, you will learn how to perform the routine maintenance service by replacing the engine oil and oil filter on th…
Other guides you may be interested in
|
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.121
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |