Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to install led indicator lights in a 2021 Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Side turn signal light bulb
Operation: How to install led indicator lights in a 2021 Dacia Sandero

In this video tutorial we can see how it is possible to install the LED lights of the indicators in a 2021 Dacia Sandero, following a few simple steps: the first thing to do is to buy the LED bulbs to replace the halogen lamps of the indicators (at an authorized auto parts dealer); next step we have to get on board the car, turn off the car and pull the handbrake, pull the bonnet lever and lift the bonnet and secure it with a special rod. Unscrew the halogen bulb anticlockwise and remove it from its seat. Place the new LED bulb in place and turn it clockwise; insert the bulb with the holder into the housing, following the appropriate marks, to center the bulb correctly. Start the engine and check the correct functioning of the indicators.


Posted on 10 May 2023 by ScegliAuto

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the arrow fuse of a Dacia Sandero located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos