Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Dacia
    3. :
  3. Sandero
    4. : How to install led fog lights in a Dacia Sandero

Dacia Sandero - Video tutorial

Model: Dacia Sandero MK 3 - Years 2021-2024
Part: Light bulb
Operation: How to install led fog lights in a Dacia Sandero

In this video tutorial we can see how it is possible to install led fog lights in a Dacia Sandero by following a few simple steps: the first thing to do is to buy the led bulbs at an authorized car spare parts dealer. Next step, you have to board the car, turn off the car and pull the handbrake; put a hand under the front of the vehicle and remove the plastic cover; once the cover has been removed, we have to put our hand inside the hole and at a certain point you will find a cable with the bulb of the light bulb; to remove the bulb, turn it anticlockwise and it releases; once you have removed the bulb, you must install the new led bulb and reassemble all the parts by proceeding backwards. Do the same procedure with the other fog light as well.


Posted on 10 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos