Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Dacia Sandero

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

See other generations:
Video tutorial

Enter the cabin of the Sandero and sit in the driver's seat to use the instrument cluster. With the instrument cluster off, turn it on with the key. Before resetting the warning light, take a tyre inflation kit and compressor, and inflate the tyres to the pressure indicated in the owner's manual.

Use the end button located on the right side of the steering wheel. Press the end button repeatedly until you reach the SET message displayed on the instrument cluster.

When the SET message appears, press and hold the end button. The SET message will start to flash.

Keep holding the end button until the flashing stops, and then the warning light will turn off.


Updated on 30 July 2026 by ScegliAuto


Related tutorials

How to Reset the "Tyre Pressure" Light on a Dacia Sandero
How to Reset the "Tyre Pressure" Light on a Dacia Sandero
Dacia Sandero (2012-2020 / B8) Before you begin, sit in the driver's seat of your Dacia Sandero. Start by turning the ignition key to start the engine. Next, select the "Set tp" op…
How to reset the tyre pressure warning light on a Dacia Sandero?
How to reset the tyre pressure warning light on a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…
How to Reset the Tyre Warning Light on a Dacia Sandero
Dacia Sandero (2021-2026 / MK 3) This video explains how to reset the tyre warning light on a new generation Dacia Sandero. The light is yellow and located at the bottom right of the…

Other guides you may be interested in

    Frequently Asked Questions

    • Sandero 2021-2028 - How do you reset the tire pressure warning light on the Dacia Sandero Stepway? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos