Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb in a Dacia Sandero?

Model: Dacia Sandero BS - Years 2008-2012
Part: Tail light bulb

As shown in this tutorial, removing the rear light of the Dacia Sandero to replace the reverse light bulb is an extremely simple and quick operation. First, ensure the key is not in the ignition, then open the tailgate, locate the long bolt at the back of the light, and unscrew it. Next, grasp the lamp unit, pull it outward, and separate it from the bodywork. At this point, you can disconnect the connector, open the rear cover, and proceed with replacing the faulty bulb. To reassemble everything, simply follow the reverse procedure.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulb of the Dacia Sandero
How to replace the front headlight bulb of the Dacia Sandero
Dacia Sandero (2008-2012 / BS) In this short guide we will see the instructions that will allow us to disassemble and replace the headlight bulb of the Dacia Sandero. First, we ope…
How to replace the front headlight bulb of the Dacia Sandero
How to replace the front headlight bulb of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the front headlight bulb of the Dacia Sandero is a very simple operation to perform independently, you just have to follow our tutorial and…
How to Replace the Front Headlamp Bulb on a Dacia Sandero
How to Replace the Front Headlamp Bulb on a Dacia Sandero
Dacia Sandero (2008-2012 / BS) If the bulb is faulty, it will need replacing: follow these simple and quick steps to carry out the replacement on a Dacia Sandero. First, open the b…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos