Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure on a Dacia Sandero

Model: Dacia Sandero MK 3 - Years 2021-2026
Part:

In this very short video tutorial, you will learn how to reset the tyre pressure on a third-generation Dacia Sandero, produced since 2021. Before performing this operation, ensure that all four tyres are at the correct pressure as indicated by the manufacturer. Start by turning on the vehicle's ignition and pressing the menu button located on the right side of the steering wheel. Then, use the arrows to scroll through the menu options until you reach the tyre pressure section. Here, simply hold down the "OK" button for a few seconds as shown in the video to reset the warning light.

Updated on 24 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Dacia Sandero (2021-2026 / MK 3) To reset the tyre pressure light on the Dacia Sandero, first ensure the tyres are inflated to the correct pressure value, which is indicated on the s…
Dacia Sandero (2021-2026 / MK 3) To reset the tyre pressure warning light on the Dacia Sandero, inflate all the tyres to the pressure indicated on the label on the driver's door. Onc…
Dacia Sandero (2012-2020 / B8) To reset the tyre pressure warning light on a Dacia Sandero, insert the key into the lock and turn it to activate the instrument cluster. Then, repea…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos