Do it yourself
Frequently asked questions about cars and motorcycles

Where is the EOBD Port on the Dacia Sandero MK3?

Model: Dacia Sandero MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see where the EOBD (European On Board Diagnostic) port is located, which professionals use to communicate with the vehicle to discover any errors stored in the ECU and resolve issues occurring within the vehicle. On the Dacia Sandero MK3, this port is located under the dashboard, practically in the driver's footwell, between the steering column and the left wheel arch.

Users can also communicate with the vehicle via an OBD11 reader, which can be found on any e-commerce platform: there are options available at all prices, starting from a few pounds up to over £150. You can choose.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Dacia Sandero (2021-2026 / MK 3) In this video, we will see how to change the backgrounds on a Dacia Sandero Stepway with Software version 6.0.9.4. This is essential as each version …
Dacia Sandero (2021-2026 / MK 3) In today's video, you will see the steps to remove and replace the front headlight bulb of the third series Dacia Sandero, in simple and quick steps.…
Dacia Sandero (2012-2020 / B8) If you own a second generation Dacia Sandero, particularly the 2017 model, you can use the following procedure to easily locate the OBD port of the v…

    Frequently Asked Questions

    • Sandero 2012-2020 - Where is the outside temperature sensor on the Dacia Sandero located? Read answer
    • Sandero 2021-2028 - Where is the LPG filter located in the Dacia Sandero? Read answer
    • Sandero 2012-2020 - Where is the washer fluid reservoir on the Dacia Sandero? Read answer
    • Sandero 2021-2028 - How many km can the Dacia Sandero travel in reserve? Read answer
    • Sandero 2012-2020 - Where is the horn of the Dacia Sandero located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos