|
Do it yourself
| |||
| ||||
How to Perform a Full Service on the Dacia Duster
Model: Dacia Duster
MK 1, HS
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video, you can see how to perform a full service on the Dacia Duster MK1; you will change the oil, oil filter, and air filter. From underneath, remove the protection cover to access the oil drain plug. Remember to drain the oil into a suitable container, which you will then dispose of at an authorised centre. To remove the cover, there are ten bolts with a 10 mm head. Next, locate the oil filter cartridge, and next to it, you will find the oil sump with the drain plug located on one side. While draining the oil, change the air filter from the bonnet. Lift the two side tabs of the air box and pull out the entire filter. Clean the container thoroughly and replace the filter with a new one, then refit the air box. Now replace the oil filter, lubricating the seal with clean oil, remove the old one (you will need a container here as well), and fit the new one. Install a new plug and washer on the oil sump and close the cover. Now it's time to refill the oil from the top: you will need 4.2 litres of synthetic oil SAE 10W40.
Updated on 16 October 2026 by ScegliAuto
Related tutorials
Dacia Duster
(2017-2024 /
HM, MK 2)
How to reset the maintenance light when it comes on in a Dacia Duster? The maintenance light indicates when a service is due after a certain distance…
Dacia Duster
(2010-2017 /
MK 1, HS)
The complete service on the Dacia Duster 1.5 dCi includes oil change, filters, and additives. Start with the cabin filter, located under the dashboar…
Dacia Duster
(2010-2017 /
MK 1, HS)
This video shows how to turn off the AdBlue warning light in a Dacia Duster. First, refuel the AdBlue. In the Dacia Duster, the AdBlue filler is loca…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.851
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |