Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Changing Engine Oil and Oil Filter in Datsun On Do

Model: Datsun On Do BD0 - Years 2014-2020
Part: Engine oil

Let's go through the necessary guide to perform routine maintenance by changing the engine oil and oil filter in the Datsun On Do. First, lift the vehicle and start draining the engine oil by unscrewing the bolt on the oil pan. Let the oil drain into a container for about ten minutes. Now, unscrew the oil filter and replace it with the new one of the correct type (screw it on and tighten gently). Unscrew the fill cap and finally top off the oil, checking the level with the dipstick!

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter in the Datsun on-DO?
How to replace the air filter in the Datsun on-DO?
Datsun On Do (2014-2020 / BD0) As shown in this tutorial, replacing the air filter in the Datsun on-DO is an extremely simple and quick operation. First, ensure that the engine is …
Removing the Rear Door Panel of the Datsun On Do
Removing the Rear Door Panel of the Datsun On Do
Datsun On Do (2014-2020 / BD0) Today, you will learn the steps necessary to remove and replace the rear door panel of the Datsun On Do. First, open the rear door and start by remov…
How to Replace the Cabin Filter in the Datsun on-DO?
How to Replace the Cabin Filter in the Datsun on-DO?
Datsun On Do (2014-2020 / BD0) As shown in this tutorial, replacing the cabin filter in the Datsun on-DO is a very simple and quick task. First, open the hood, then remove the reta…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos