Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Transmission Fluid in a Datsun Go

Model: Datsun Go MK 1 - Years 2013-2022
Part: Transmission fluid

In this video tutorial, you will learn how to change the transmission fluid in a Datsun Go, following the instructions below. First, lift the vehicle and locate the drain plug on the transmission, using a hex wrench to unscrew it; let the fluid drain into a container for about ten minutes. Once the draining is complete, screw the drain plug back in; then open the hood and unscrew the fill cap, pouring in the new transmission fluid (about three quarts will be needed).

Updated on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Cabin Heater Radiator of the Datsun Go
Guide to Replacing the Cabin Heater Radiator of the Datsun Go
Datsun Go (2013-2022 / MK 1) Below is the guide and instructions to help you remove and replace the cabin heater radiator of the Datsun Go. First, get inside the vehicle on the d…
Where to Find the Fuse Box of the Datsun Go
Where to Find the Fuse Box of the Datsun Go
Datsun Go (2013-2022 / MK 1) If you have any issues with one or more electrical components of your Datsun Go and want to check the respective fuses but don't know where they are,…
How to Change the Engine Oil in a Datsun Go
How to Change the Engine Oil in a Datsun Go
Datsun Go (2013-2022 / MK 1) Below, discover how to correctly change the engine oil and the related filter in the Datsun Go. Before starting, remember that the entire procedure m…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos