Do it yourself
Frequently asked questions about cars and motorcycles

How to Install the Fender on a Datsun Go?

Model: Datsun Go MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Accessory kit

Video tutorial

If you frequently drive on dirt paths, it may be useful to install fenders on the wheels of the Datsun Go. You only need two tools: a drill and a screwdriver. Using adhesive tape is also helpful.

Clean the vehicle's body thoroughly, or at least the area where you will work, and position the fender. Secure it with adhesive tape and then drill the necessary holes.

Next, use the screwdriver to insert the screws where you just drilled, remove the adhesive tape, and repeat the same process on the remaining three wheels.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Datsun Go (2013-2022 / MK 1) To replace the cabin filter on a Datsun Go, access the side of the footwell on the passenger side to detach the corresponding plastic cover. Under th…
Datsun Go (2013-2022 / MK 1) In this tutorial, see how to remove the fuel pump in the Datsun Go, a very simple operation. First, ensure the key is not in the ignition for safety.…
Datsun Go (2013-2022 / MK 1) To replace the control arm on a Datsun Go, lift the vehicle so that the wheel corresponding to the arm being replaced is not in contact with the grou…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos