Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Transmission on a Derbi Variant?

Model: (Various brands) Various
Part: Drivetrain

Video tutorial

To replace the transmission on a Derbi Variant, first remove the pedal located near the protective cover on the right side of the bike. Loosen the pedal pin from both the top and bottom, allowing the pedal to be removed.

This will enable you to loosen the screws securing the cover of the casing. Once the cover is removed, you can loosen the nuts that secure the central pins of the variator and clutch, also sliding off the belt.

After removing the components, replace them with new spare parts.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

(Various brands) Various Today we will see the instructions that will allow us to disassemble and replace the transmission pulley of the Piaggio SI, but also of the Ciao and …
(Various brands) Various The instructions in this guide will allow you to remove and replace the drive belt and variator of the Sym Mio 50 scooter. First, place the scooter o…
(Various brands) Various In this video tutorial, you can see how to replace the transmission fluid in your car. The first step is to lift the bonnet and secure it with the ap…

How to Set the Clock on a Yamaha NMAX 125 Scooter?

In this tutorial, you will learn how to set the clock on a Yamaha NMAX 125 scooter, a very simple and quick operation to perform, for example, after disconnecting the battery or following the switch to daylight saving time. First, insert the key, then turn on the instrument cluster and press and hold the "MODE" button on the left control until the clock starts to flash. Next, adjust the hour by pressing the button quickly, hold it down to switch to minutes, and similarly adjust them before finally saving the setting.

Watch the video!


by ScegliAuto

More videos