Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the lock cylinder in the Dodge Challenger?

Model: Dodge Challenger MK 3 - Years 2008-2023
Part: Door lock

In this tutorial, we can see how to replace the lock cylinder in the Dodge Challenger, an extremely simple and fast operation. First of all, we open the door in which we will be working, then we move the gasket at the height of the handle, locate the newly freed hole and loosen the bolt located inside with a Torx T17 key, obviously being careful not to drop it. We then grab the handle, separate it from the door and remove the lock cylinder. At this point, all that remains is to insert the replacement and reassemble everything following the reverse procedure.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to open the boot lid when it is stuck on a Dodge Challenger?
How to open the boot lid when it is stuck on a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) On the Dodge Challenger, the boot lid may become stuck due to issues with the battery or the lock actuator. In such cases, you can still perform an e…
How to Remove the Airbag from a Dodge Challenger?
How to Remove the Airbag from a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) Good morning, today you will remove the airbag from a Dodge Challenger. Start by sitting in the driver's seat of the car. Next, locate the airbag cov…
How to replace the battery in the remote control of the Dodge Challenger?
How to replace the battery in the remote control of the Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) In this tutorial, we will see how to replace the battery of the Dodge Challenger remote, a very simple and quick operation. To do this, we will need …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos