Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Climate Control Buttons in a Dodge Journey?

Model: Dodge Journey MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: A/C controls

Video tutorial

In this tutorial, see how to replace the climate control buttons in a Dodge Journey, a very simple operation. First, ensure the key is not inserted, then carefully pry off both central trim pieces using a plastic spatula.

Next, remove the two screws indicated using a Torx T15 spanner, separate the control console from the dashboard, and disconnect the internal connector. At this point, unclip the three knobs, remove the rear screws, and separate the control module.

To fit the replacement and reassemble everything, simply follow the reverse procedure.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

Where is the air conditioning recharge valve located on the Dodge Journey?
Where is the air conditioning recharge valve located on the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) In this video, you can see where the air conditioning recharge valve is located on the Dodge Journey and how to insert new refrigerant gas, a very si…
How to Use the Automatic Air Conditioning on the Dodge Journey
How to Use the Automatic Air Conditioning on the Dodge Journey
Dodge Journey (2008-2020 / MK 1) This video shows how to use the controls of the automatic air conditioning on the Dodge Journey: the system automatically adjusts the temperature of …
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Removing Cigarette Lighter from Dodge Journey - Fiat Freemont
Dodge Journey (2008-2020 / MK 1) In this tutorial video, you will learn how to remove the cigarette lighter from a Dodge Journey in simple steps, a procedure that is identical for th…

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos