Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the injectors from the Dodge Journey V6.

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Fuel injectors

Today's guide will show us how to disassemble and replace the fuel injectors of the Dodge Journey V6, as well as the Fiat Freemont. First, we open the hood of the car and begin to disassemble and remove the plastic cover of the engine; then we remove the intake hose and the air filter box, as shown in the video. At this point, we remove the injector rail by unscrewing its screws and disconnecting the connectors to remove it, as shown in the video. We check the functioning and replace any faulty injectors if necessary.

Posted on 26 May 2023 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) If you are looking for the box containing all the fuses for your Dodge Journey, you just need to follow all the steps described in the following guid…
Where is the fuse box of the Dodge Journey located?
Where is the fuse box of the Dodge Journey located?
Dodge Journey (2008-2020 / MK 1) Thanks to the procedure described in our new guide dedicated to all of you who own a Dodge Journey, you will be able to find the box containing all t…
How to change the time on the Dodge Journey
How to change the time on the Dodge Journey
Dodge Journey (2008-2020 / MK 1) These short and simple steps will show us how to change the time on the Dodge Journey, following the instructions below. First of all, we get into th…

Other guides you may be interested in

How to Install Universal Roof Bars on a Renault Clio

Install universal roof bars on a Renault Clio. Universal roof bars are used on cars with roof rails (fixed bar secured to the roof of the car) and without. Fit the bar kit (as shown in the video) with the bars adjusted according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once you have adjusted the width of the anchoring brackets (measure with a tape measure), tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, fit the safety caps on both sides.

Watch the video!


by ScegliAuto

More videos