Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil service in the Dodge Journey?

Model: Dodge Journey MK 1 - Years 2008-2020
Part: Service warning light

Resetting the oil service in the Dodge Journey, as we can see in this tutorial, is an extremely simple and quick operation. Before proceeding, we must have completed the required scheduled maintenance work. Let's start by going inside the vehicle, then insert the key and turn on the instrument panel, not the engine. Next, press the accelerator pedal all the way down three times in a row, turn off the panel, and check that the reset has been successful by starting it again. If not, repeat the operation, making sure to complete it within 10 seconds.

Posted on 28 September 2023 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Dodge Journey
How to reset the oil light on the Dodge Journey
Dodge Journey (2008-2020 / MK 1) To manually reset the oil light of your 2016 Dodge Journey, simply follow this simple manual procedure. First, enter the interior of the vehicle and …
How to replace the engine oil and oil filter of the Dodge Journey
How to replace the engine oil and oil filter of the Dodge Journey
Dodge Journey (2008-2020 / MK 1) These simple steps will show us how to perform the routine maintenance check, replacing the engine oil and oil filter, of the Dodge Journey, but also…
How to reset the service light in the Dodge Journey?
Dodge Journey (2008-2020 / MK 1) In this tutorial we can see how to reset the service in the Dodge Journey, an extremely simple and quick operation, to be carried out only once all s…

Other guides you may be interested in

How to Remove the Spark Plugs on an Opel Astra

Want to remove the spark plugs on an Opel Astra? Here's how to proceed: pull the engine bay release lever and lift the front bonnet, securing it. Remove the plastic cover on the soundproofing panel covering the engine (if present), then remove the pins on the coil bar using a screwdriver. Disconnect the coils by hand after unplugging the power connector, then use your socket to unscrew the spark plugs and pull them out of the cylinder head. Take the new spark plugs and guide them into the engine head with the socket extension, tighten them and reconnect the respective power connectors. Finally, close the engine bay.

Watch the video!


by ScegliAuto

More videos