Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses in the Dodge Challenger

Model: Dodge Challenger MK 3 - Years 2008-2023
Part: Fuse box

The fuse box of your Dodge Challenger is located inside the engine bay. Follow these steps to access the fuses quickly and safely. First, park the vehicle on a level surface, then turn it off completely and lift the bonnet to access the entire engine compartment. At this point, locate the fuse box on the right side and remove the protective cover. Once this simple operation is complete, you will finally have free access to the fuses you were looking for.

Updated on 1 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Where to Find the Fuse Box on the Dodge Challenger
Dodge Challenger (2008-2023 / MK 3) To find the fuse box on your Dodge Challenger third generation (2015-2022), carefully read the following guide and follow the instructions provided. …
How to open the boot lid when it is stuck on a Dodge Challenger?
How to open the boot lid when it is stuck on a Dodge Challenger?
Dodge Challenger (2008-2023 / MK 3) On the Dodge Challenger, the boot lid may become stuck due to issues with the battery or the lock actuator. In such cases, you can still perform an e…
How to Reset the Oil Light on a 2009 Dodge Challenger
How to Reset the Oil Light on a 2009 Dodge Challenger
Dodge Challenger (2008-2023 / MK 3) To correctly complete the manual reset of the engine oil light on your Dodge Challenger (2009), follow the instructions in this guide. First, get int…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos