Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the uConnect 8.4 system?

Model: Dodge Charger LD - Years 2011-2023
Part: Warning light – error code

To reset the uConnect 8.4 system, insert the ignition key into the lock to switch on the instrument panel. Once done, press and hold the top right corner of the central screen on the dashboard for about fifteen seconds. While continuing to hold the screen at this point, you will notice that it will turn off automatically and then turn back on after a few seconds. Upon rebooting, all infotainment settings will have been restored.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Dodge Charger (2011-2023 / LD) To reset the Uconnect system on the Dodge, start by turning on the car's instrument panel and powering on the infotainment system if it is off. Once …
Dodge Charger (2011-2023 / LD) To reset the uConnect system on the Dodge Charger, turn on the instrument panel and hold down the buttons to raise and lower the temperature for a fe…
Dodge Charger (2011-2023 / LD) To reset the Uconnect system on the Dodge Charger, first get into the vehicle and close all four doors. Turn on the ignition without starting the eng…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos