Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Dodge Charger located?

Model: Dodge Charger LD - Years 2011-2023
Part: Fuse box

If you have not yet been able to locate the box containing all the various fuses of your Dodge Charger, do not worry because in the following guide you will find all the indications you need. First of all, unlock the front hood with the appropriate lever located on the lower part of the dashboard, then open the hood and locate the fuse box located on the left side of the engine compartment. Once found, you must remove the cover, being careful not to damage it, and you will finally have free access to the fuses. To work on them, it is necessary to disconnect the battery for safety reasons.

Posted on 5 April 2024 by ScegliAuto

Video tutorial

Related tutorials

What is the fuse layout of the Dodge Charger?
What is the fuse layout of the Dodge Charger?
Dodge Charger (2011-2023 / LD) In this video we can see where the fuse boxes of the Dodge Charger are located and what their respective diagrams are, to consult in case we need to …
Where are the windshield wiper relays located in the Dodge Charger?
Where are the windshield wiper relays located in the Dodge Charger?
Dodge Charger (2006-2011 / LX) If the windshield wipers of our Dodge Charger have suddenly stopped working and the various fuses are intact, we can then check the status of the res…
How to disassemble the injectors in a Dodge Charger?
How to disassemble the injectors in a Dodge Charger?
Dodge Charger (2011-2023 / LD) In this tutorial, we can see how to disassemble the injectors in the Dodge Charger, a very simple operation. First of all, we wait for the engine to …

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500L

Learn how to fit universal roof bars on a Fiat 500L. These bars are used on vehicles with or without roof rails. Assemble the roof bar kit (as shown in the video) with bars adjusted to the width of the vehicle (measure with a tape measure). Position the brackets at both ends of the doors on the vehicle's original roof rails. Once the anchoring bracket width is set, tighten the bolts with a butterfly nut (if a lock is present) until fully secured to the roof rails. Fit safety caps on both sides.

Watch the video!


by ScegliAuto

More videos