Do it yourself
| ||||
|
EMC Wave 3 - Video tutorial
Model: EMC Wave 3
MK 1
- Years 2022-2024 To be honest, this video does not explain the customization of the interiors of only EMC cars, but of any other type of vehicle, making them original and better in appearance. It starts with the leather steering wheel cover, which is then sewn with needle and thread, to continue with the adhesive covering of the internal door handle, to be applied with a heat gun and finished with a cutter. Furthermore, it is possible to install a variable color LED strip in the driver's side tunnel, simply using double-sided tape and passing the power cable under the carpet. It can be activated, when desired, from the portable remote control.
Posted on 12 March 2024 by ScegliAuto
This video is currently unavailable
Other guides that may interest you
|
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |