Do it yourself
Frequently asked questions about cars and motorcycles

How to reset and calibrate the automatic gearbox of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Warning light – error code

Below we will see the steps that will allow us to reset and calibrate the automatic transmission of the Fiat 500. First of all, we get on board the vehicle and start removing the plastic cover that we find under the steering wheel; then we connect the OBD central unit to our diagnostic socket, as shown in the video. At this point, we follow the guided procedure to calibrate and consequently reset the automatic transmission, restoring the factory values; we then verify the correct operation of the transmission, following the video tutorial to the end!

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2012-2023 / 500 L) In this video, you will see how the automatic gearbox of the Fiat 500L works: without a clutch, you will only use your right foot. All gear changes w…
Fiat 500 (2007-2022 / 312) To use the automatic gearbox of the Fiat 500, position the gear lever in the N position, insert the key in the ignition and start the engine while pr…
Fiat 500 (2007-2024 / 312) The automated or semi-automatic gearbox of the Fiat 500 has three main issues related to oil leaks that can be fixed on their own. Oil leaks are almo…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the Start&Stop light on the Fiat 500 X indicate? Read answer
    • 500 2007-2022 - What warning lights do we find in the FIAT 500? Read answer
    • 500 2007-2022 - What does the triangle warning light with the exclamation point mean in the Fiat 500? Read answer
    • 500 2007-2021 - What does the S warning light on the Fiat 500 indicate? Read answer
    • 500 2014-2022 - What are the yellow warning lights on the Fiat 500X? Read answer
    • 500 2014-2022 - How to enter the radio unlock code in a Fiat 500? Read answer
    • 500 2014-2022 - What does the "driving mode not available" error mean on my Fiat 500X? Read answer
    • 500 2007-2024 - The "radio blocked wait" error appears on the radio of my Fiat 500, how can I unblock it? Read answer
    • 500 2012-2023 - What does the yellow warning light with an exclamation point in a triangle mean in the Fiat 500L? Read answer
    • 500 2007-2024 - What does the "Hill holder / ESP not available" warning light mean in the Fiat 500? Read answer
    • 500 2012-2023 - What does the warning triangle with the exclamation point mean on the FIAT 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos