Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to replace the Fiat Punto headrests

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Accessory Kit
Operation: How to replace the Fiat Punto headrests

For this simple operation it will only be necessary to equip yourself with the appropriate tools to carry out the operations in the correct way, in fact using an adjustable parrot key you can tighten the base that hooks and enters the seat, in fact by tightening it and turning it slightly the iron rod that enter the seat it will free itself and come out, repeat the operation for the other side as well and in this way you can completely extract the headrest, obviously retrace the steps described backwards for reassembling the various components, and that's it!


Posted on 4 October 2023 by ScegliAuto



How to remove the Fiat Punto headrests
Fiat Punto (1993-1999 / 176, MK 1) The removal of the headrests of the front seats is done in the same way on many models of the Turin house; practically, the head rests have two steel
How to fold down the rear seats on a Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) To fold the rear seats of the Fiat Punto, you can follow these general steps. Open the trunk: this will give you access to the levers or buttons that
How to replace the service belt on a Fiat Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Before we can begin, we will have to get out of the cockpit of our Fiat Punto, and then lift the front with a bridge or a jack. So let's start by loo

    Frequently Asked Questions

    • Punto 2005-2018 - How to remove the stickers on the uprights of the Punto Evo? Read Answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto crik located? Read Answer

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos