Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Change Light on a Fiat Ducato

Model: Fiat Ducato MK 2 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Service warning light

See other generations:
Video tutorial

After replacing the engine oil, it is necessary to reset the service light; here’s how to perform the procedure for the Fiat Ducato, as well as the Peugeot Boxer. First, get into the vehicle and turn on the instrument panel; then press and hold the button located on the right side of the panel for ten seconds, as illustrated in the video.

At this point, the display will show "CFG", allowing you to reset the maintenance light by following the guided procedure; finally, turn off the panel and start the engine!


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Fiat Ducato 2014 Service Reset Instructions
Fiat Ducato 2014 Service Reset Instructions
Fiat Ducato (2014-2026 / X290) In today's tutorial video, you will see the instructions on how to reset the service light for the regular maintenance oil change of a Fiat Ducato th…
How to Reset the Service Light on a Fiat Ducato
How to Reset the Service Light on a Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today we will see the procedure necessary to reset the service light for the routine maintenance oil change on a Fiat Ducato. First, get inside the v…
Resetting the service light on a Fiat Ducato JTD
Resetting the service light on a Fiat Ducato JTD
Fiat Ducato (2006-2014 / X250) In this guide video, we will see how to reset the service light for the regular maintenance oil change on a second-generation Fiat Ducato. First, get…

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos