Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Punto
  6. : How to fit hydraulic hood pistons

Fiat Punto - Video tutorial

Model: Fiat Punto 176, MK 1 - Years 1993-1999
Part: Bodywork
Operation: How to fit hydraulic hood pistons

The video shows how to intervene on the opening of the engine compartment with a simple installation of two hydraulic pistons, which give the bonnet greater opening fluidity and more space to be able to intervene with mechanical work on the engine if necessary. The installation consists in fixing, by means of screws and washers, one end of the piston to the bodywork and the other to the bonnet and repeating the same operation on the other side of the car. The video refers to the first edition Fiat Punto model. The tools used are: an Allen key and a wrench (compatible with the chosen screws).


Posted on 26 June 2023 by ScegliAuto



Rear door hydraulic pistons replacement
Fiat Punto (1999-2011 / 188, MK 2) To replace the pistons it is necessary to remove the plastic protections close to the fixing screws. To do this, just insert a screwdriver into the a
How to replace the front brake pads on a Fiat Punto 188
Fiat Punto (1999-2011 / 188, MK 2) The guide shows how to replace the front brake pads on the Fiat Punto 188. After unscrewing the hydraulic brake fluid cap, unscrew the front wheel fi
How to replace the tailgate pistons on the 2009 Grande Punto
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) In this video we will see how to replace the rear tailgate pistons of the Grande Punto 2009. The operation is quite simple but it takes two because o

Other guides that may interest you

    Frequently Asked Questions

    • Punto 2005-2018 - Cost of bonnet painting on Fiat Punto Evo? Read Answer
    • Punto 2005-2018 - How much does the Fiat Grande Punto trunk lock cost? Read Answer
    • Punto 2005-2018 - How much does it cost to repaint a Fiat Grande Punto? Read Answer
    • Punto 2005-2018 - How much does it cost to paint the hood of the Fiat Grande Punto? Read Answer

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos