Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Ventilation Fan from a Fiat Punto

Model: Fiat Punto MK 2, 188 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Blower motor

See other generations:
Video tutorial

In this video, see how to remove the cabin ventilation fan from a Fiat Punto. The fan is located directly under the dashboard (right side of the glove compartment).

Use a socket wrench to unscrew the securing screws on the fan cover. Once this is done, pull off the cover with the fan after disconnecting the power cables.

Clean the fan properly (disassemble the fan and its parts). Finally, reassemble the previously disassembled fan and all its components under the glove compartment.

Test the correct functioning at the end.


Updated on 27 February 2026 by ScegliAuto


Related tutorials

How to Remove the Fan Resistor on a Fiat Grande Punto
How to Remove the Fan Resistor on a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This video shows how to remove the ventilation resistor in the cabin of a Fiat Grande Punto. The resistor is located directly under the dashboard nea…
Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Guide to Replacing the Cabin Fan of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this guide, we will look at the main instructions on how to disassemble and replace the cabin fan on the Fiat Punto Evo, as well as the Grande Pun…
How to Replace the Cabin Fan Resistor in a Fiat Punto
How to Replace the Cabin Fan Resistor in a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the cabin fan in a Fiat Punto, you need to completely detach the carpet located under the glove compartment on the passenger side. Once th…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos