Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cabin Fan of the Fiat Punto Evo

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

In this guide, we will look at the main instructions on how to disassemble and replace the cabin fan on the Fiat Punto Evo, as well as the Grande Punto. First, let's locate the cabin fan, which is positioned at the bottom on the passenger side (under the glove compartment); we will then unscrew its fastening screws to remove it, disconnecting the power supply electrical connector, as shown in the video.

At this point, we carry out the repair or replacement of the cabin fan, reconnecting it; let's then check its operation at various speeds.


Posted on 1 January 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor in a Fiat Punto
How to Replace the Cabin Fan Resistor in a Fiat Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the cabin fan in a Fiat Punto, you need to completely detach the carpet located under the glove compartment on the passenger side. Once th…
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…
How to Replace the Climate Control Knob of the Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) In this short and simple guide, you will see the steps to remove and replace the climate control knob of the Fiat Punto Evo, as well as the Grande Pu…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos