Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan Resistor in a Fiat Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Blower motor

See other generations:
Video tutorial

To replace the cabin fan in a Fiat Punto, you need to completely detach the carpet located under the glove compartment on the passenger side. Once the carpet is removed, you can locate the fan and remove it from its housing by disconnecting the connectors and unscrewing the fixing screws.

The resistor will be directly connected to the fan and can be disconnected, replacing it with a new spare part. After replacement, remount the fan, ensuring it works correctly.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

Replacing the Heater Fan Resistor on Fiat Grande Punto
Replacing the Heater Fan Resistor on Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Want to remove the heater fan resistor on a Fiat Grande Punto? Let's see how to disassemble the fan resistor. Remove the plastic cover from under the…
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
How to Replace the Cabin Fan Resistor of a Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below we will see the procedure to remove and replace the cabin fan resistor of a Fiat Grande Punto. First, get inside the vehicle on the front passe…
How do you replace the cabin fan resistor of the Fiat Punto?
How do you replace the cabin fan resistor of the Fiat Punto?
Fiat Punto (1999-2011 / MK 2, 188) It will be possible to replace the cabin fan resistor of the Fiat Punto by loosening the screws that secure the trim panel located below the glove co…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos