Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the timing on the Fiat Grande Punto 1.2

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Checks and maintenance

See other generations:
Video tutorial

In this guide, we will see the instructions that will allow us to carry out the timing of the Fiat Grande Punto and Punto Evo, with a 1.2 petrol engine. The engine timing is performed after the replacement of the timing belt; it is necessary to use the appropriate tools for the timing of the crankshaft and camshaft.

Once the block is inserted on the crankshaft pulley, it will be possible to turn the pulley and give the correct degrees for the timing, as declared by the manufacturer; make sure everything is perfectly aligned, following the video tutorial to the end!


Posted on 6 December 2024 by ScegliAuto


Related tutorials

Guide to Replacing the Timing Belt on the Fiat Punto 1.4
Guide to Replacing the Timing Belt on the Fiat Punto 1.4
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) This guide will show you the main steps for removing and replacing the timing belt on the Fiat Punto 1.4. First, open the bonnet of the vehicle and s…
How to Remove the Steering Wheel and Power Steering Motor from a Fiat Grande Punto?
How to Remove the Steering Wheel and Power Steering Motor from a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To remove the steering wheel from the Fiat Grande Punto, first remove the airbag: insert the appropriate keys into two holes located at the back of t…
How to programme the key for the Fiat Grande Punto
How to programme the key for the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) Below are the main instructions that will allow you to programme the key for the Fiat Grande Punto, as well as the Punto Evo. To programme and code t…

    Frequently Asked Questions

    • Punto 2005-2018 - What does the words "ESP, Hill holder not available" mean on the Fiat Punto Evo? Read answer
    • Punto 1999-2011 - How do you remove the headrest of the Fiat Punto 1.2? Read answer
    • Punto 2005-2018 - Where is the inertia switch on the Fiat Punto? Read answer
    • Punto 2005-2018 - How do i remove the center console of my Fiat Punto? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos