Do it yourself
Frequently asked questions about cars and motorcycles

How to activate and deactivate parking sensors in the Fiat 500e?

Model: Fiat 500 500 E, 332 - Years 2020-2026
Part: Parking sensors

In this tutorial we can see how to deactivate and activate the parking sensors in the Fiat 500e, a very simple and quick operation. First of all, let's go inside the car, then insert the key and turn on the instrument panel. Next, we locate the button panel located in the lower left area of the dashboard, on the driver's side, and press the first button on the left. In the main display, we will notice the message informing us that the parking assistance system has been deactivated. By pressing the button again, we will reactivate the system.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2020-2026 / 500 E, 332) In this short guide, we will see the instructions that will allow us to enable and disable the lane assistant or lane assist on the Fiat 500e, in sim…
Fiat 500 (2020-2026 / 500 E, 332) In this new guide, we will describe the steps you need to take in order to quickly locate the fuse box of your Fiat 500e. First of all, park the car …
Fiat 500 (2020-2026 / 500 E, 332) Disabling or enabling the attention assistant on a Fiat 500 electric car is a simple and quick operation to be carried out independently. To proceed …

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Why do the parking sensors of the Fiat 500 no longer work? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos