|
Do it yourself
| |||
| ||||
Engine Oil and Oil Filter Replacement
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
It is recommended to perform this operation with a cold engine to avoid burns.
Lift the vehicle on a hydraulic lift or, if using a jack, ensure the vehicle is secured on two axle stands. Open the front bonnet and secure it with the prop rod. Open the oil filler cap and remove the dipstick to facilitate the draining process. Place a suitable container (approximately 5 litres) under the oil sump and remove the plug with a 10mm hex key to allow the oil to drain. In the meantime, unscrew the oil filter cartridge using a strap wrench: place a container under the filter to catch the oil. Then, apply the new filter after coating the gasket with oil to improve adhesion; tighten the filter by hand. Once the oil has drained, refit the plug and tighten it properly. Lower the vehicle from the axle stands and top up the engine oil with the specified SAE grade and quantities indicated in the owner's manual.
Updated on 3 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …
Fiat Punto
(1999-2011 /
MK 2, 188)
Replacing the engine oil and its filter is essential for ensuring optimal engine efficiency. It is recommended to change the filter with every oil ch…
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.576
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |