Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : Engine oil and filter replacement

Fiat Punto - Video tutorial

Model: Fiat Punto 188, MK 2 - Years 1999-2011
Part: Oil filter
Operation: Engine oil and filter replacement

The replacement of the engine oil and its filter are absolutely essential to ensure perfect efficiency of the engine itself, for this reason it is advisable to replace the filter at each oil change (and not once and once as it was used to do in the past) and also to anticipate the maintenance interval, especially if the distribution is chain. Having said that, intercept the filter seat which is located right next to the yellow cap for oil filling, unscrew the cap and extract the old filter; install the new filter and the new O-rings and then lift the car and drain the used oil from the sump drain plug; finally fill the engine with clean oil up to the maximum level.


Posted on 3 September 2023 by ScegliAuto



Fiat Grande Punto 1.3 Multijet engine oil and oil filter replacement
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Below we will find out how to carry out the routine maintenance service, replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multije
Changing the oil and engine oil filter
Fiat Punto (1999-2011 / 188, MK 2) Changing the oil is one of the most common routine maintenance operations. To remove the used oil, the cap on the bottom of the oil pan must be unscr
1300 MultiJet oil change
Fiat Punto (2005-2018 / Punto EVO, Grandepunto , MK 3, 199) Engine oil replacement on 1300 MultiJet engine? Let's see the replacement on the Fiat Punto. We open and pull up the front hood, we secure the same.

    Frequently Asked Questions

    • Punto 2005-2018 - Where is the oil filter on Fiat Punto? Read Answer
    • Punto 2005-2018 - Where is the Fiat Grande Punto oil filter located? Read Answer

How to set the time in the Citroen DS3?

In this tutorial we can see how to set the time in the Citroen DS3, an extremely simple and fast operation, to be carried out for example after being left with the battery on the ground or following the transition to winter and summer time. First of all, turn on the instrument panel, then press the "Menu" button on the center console and enter the settings section. Then select "Display configuration", then "Date and time configuration" and proceed with the time change using the same keys. Once finished, we select "OK" at the bottom left.

Watch the video!


by ScegliAuto

More videos