Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Replacement on a Fiat Punto Evo

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Engine oil

Let’s look at the engine oil replacement on a Fiat Punto Evo. Lift the vehicle with a jack, then locate the plug under the oil sump. Unscrew the bolt under the oil sump with a suitable socket wrench to allow the oil to drain into a container for future disposal. After draining all the oil, screw the bolt back into the oil sump. Use a strap wrench to unscrew the oil filter. Remove the old filter and screw on the new one. Finally, top up the oil reservoir with new fluid following the manufacturer's recommendations. Close the engine bay after maintenance.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Oil and Oil Filter Change on the Fiat Punto Evo 1.3 MultiJet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Today, you will learn how to change the engine oil and oil filter on the Fiat Punto Evo 1.3 MultiJet, as well as on the Fiat Grande Punto. First, ope…
What does the oil light indicate on the Fiat Punto EVO?
What does the oil light indicate on the Fiat Punto EVO?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) When the red oil warning light comes on in a Fiat Punto EVO, it means that it is necessary to replace the oil and the oil filter. Once the oil change…
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Engine Oil and Oil Filter Replacement for the Fiat Grande Punto 1.3 Multijet
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) Follow these steps to carry out the routine maintenance service by replacing the engine oil and oil filter of the Fiat Grande Punto 1.3 Multijet, as …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos