|
Do it yourself
| |||
| ||||
How to dismantle the front cover of the steering wheel of the Fiat Doblo
Model: Fiat Doblo
223, Doblo 1, MK 1
- Years 2000-2009
If you need to remove the front plastic cover of the steering wheel of your Fiat Doblo in order to access the airbag system or to perform a general maintenance intervention, then all you have to do is carefully follow the instructions described in this new guide. First of all, completely turn off the vehicle and use a common screwdriver to partially remove the front cover of the steering wheel. Then locate the electrical cables connected to it and disconnect both of them in order to complete the removal of the steering wheel cover of the vehicle.
Posted on 30 January 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Doblo
(2009-2021 /
MK 2, 263, Doblo 2)
In this tutorial, we can see how to disassemble the steering wheel in the Fiat Doblò, an extremely simple and quick operation. First of all, we open …
Fiat Doblo
(2009-2021 /
MK 2, 263, Doblo 2)
In this short guide, we will see the instructions on how to disassemble and eventually replace the steering wheel airbag of the Fiat Doblò. First, we…
Fiat Doblo
(2009-2021 /
MK 2, 263, Doblo 2)
In this guide, we will see the main steps on how to dismantle and replace the steering wheel of the Fiat Doblò. Firstly, we get inside the car and re…
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.101
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
