Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the service light on the Fiat Panda?

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Service warning light

The Fiat Panda, which we have a presentation of in the video available here, is equipped, like most cars, with the service due light, which we will notice turning on when the service is due. We will perform the necessary maintenance, oil and filter change, and, if required by the manufacturer's program, other interventions, without forgetting to reset the aforementioned warning at the end. But how do we reset it? We turn on the instrument panel, press the accelerator pedal, press the brake pedal seven times, and on the seventh time, hold it down for sixty seconds, release both pedals, and turn off the aforementioned instrument panel.

Posted on 4 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Crankshaft Position Sensor on a Fiat Panda
How to Replace the Crankshaft Position Sensor on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda. Begin by lifting the front of the car. Then, unclip the connector securing the crankshaft positi…
How to Remove the Oil Pressure Sensor on the Fiat Panda
How to Remove the Oil Pressure Sensor on the Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Today, in this video tutorial, learn how to remove and replace the engine oil pressure sensor and the crankshaft speed sensor on the Fiat Panda. Firs…
Removing Engine RPM Sensor on Fiat Panda
Removing Engine RPM Sensor on Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) In this video tutorial, you will learn how to remove the engine RPM sensor from a Fiat Panda, specifically the 4X4 model. First, remove the front whe…

    Frequently Asked Questions

    • Panda 2003-2012 - What to do when the service warning light comes on on the Fiat Panda 169? Read answer
    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos