Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the battery of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Battery

When you want to reset the battery on a Fiat 500, it means that there are error codes stored in the control unit that cannot be removed from memory and reappear every time the car is started. To perform this reset, you will need to disconnect the battery for about half an hour: this way the error codes will be eliminated and it will be possible to connect a diagnostic tool to verify this. After the connection, it will be possible to select all the stored errors and verify that they will not be present again.

Posted on 20 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Press the designated unlock button to extract the physical emergency key from the electronic key of your Fiat 500 X. Using the extracted physical key…
How to reset the battery sensor of the Fiat 500 1.2
How to reset the battery sensor of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) In this guide we will see the instructions on how to reset the battery sensor of the Fiat 500 1.2. First of all, we open the engine hood and locate t…
How to Replace the Key Battery of a Fiat 500 X
How to Replace the Key Battery of a Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Replacing the remote battery is a simple and quick task for any car remote. The most commonly used battery model is the CR 2032, available online or …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos