Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Punto
    4. : How to disassemble and clean the Carburetor on Fiat Grande Punto

Fiat Punto - Video tutorial

Model: Fiat Punto MK 3, 199, Punto EVO, Grandepunto - Years 2005-2018
Part: Carburetor
Operation: How to disassemble and clean the Carburetor on Fiat Grande Punto

We disassemble and clean the carburetor on a Fiat Grande Punto. Let's see in this video guide how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a socket wrench we unscrew the soundproofing panel and disassemble the carburetor, remove it from its housing. Once the carburetor has been disassembled, clean it with a special cleaning liquid (in a can). After cleaning, we reassemble the carburetor in the engine compartment with the attached pieces and pins. Finally we reassemble the soundproofing panel. We close the front hood at the end of the maintenance.


Posted on 20 October 2023 by ScegliAuto

Other guides that may interest you

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos