Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the side turn signal bulb on the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Light bulb

If you want to replace the small arrow light bulb located on the lower side of the front bumper of your Fiat 500, then all you have to do is follow the steps described in the following guide. First of all, you must park the car on a flat surface and then go outside and position yourself next to the wheel arch. At this point, remove the plastic cover and disconnect the electrical cable. Finally, remove the faulty bulb and replace it with a new one that is perfectly compatible. Reassemble the wheel arch cover and you are done.

Posted on 23 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Side Indicator Bulb on the Fiat 500
How to Replace the Side Indicator Bulb on the Fiat 500
Fiat 500 (2007-2022 / ) To replace the side indicator bulb on your new Fiat 500, follow the instructions in this guide. Before starting, ensure the car is turned off and par…
Replacing the Indicator Bulb on a Fiat 500
Replacing the Indicator Bulb on a Fiat 500
Fiat 500 (2007-2024 / 312) Remove the indicator bulb if damaged or if you need to replace the light unit itself. Use a lever to remove the light unit from the bodywork (do not …
How to remove the rear turn signal bulb of the Fiat 500 Abarth
How to remove the rear turn signal bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Below we will see the instructions that will allow us to disassemble and replace the turn signal bulb of the rear taillight of the Fiat 500 Abarth. F…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos