Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Indicator Bulb on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Side marker bulb

Remove the indicator bulb if damaged or if you need to replace the light unit itself. Use a lever to remove the light unit from the bodywork (do not damage the bodywork), pull the indicator light out from the body, and disconnect the power connector. Replace the indicator light if damaged or replace the damaged bulb with a new one (same size and voltage). Connect the electrical connector in the indicator light unit. Push the light unit with your hands until it is fully secured in the panel. Test the correct operation of the indicator bulb.

Updated on 19 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Indicator Bulb on a Fiat 500?
How to Replace the Front Indicator Bulb on a Fiat 500?
Fiat 500 (2007-2022 / 312) To replace the front indicator bulb on a Fiat 500, use a tool to pry off the corresponding light unit from its housing. Once the light is removed, di…
How to Replace the Indicator Bulb on a Fiat 500
How to Replace the Indicator Bulb on a Fiat 500
Fiat 500 (2007-2021 / 312) To replace the indicator bulbs on a Fiat 500, turn the wheels to the opposite side of the bulb to be replaced. Once the wheels are turned, access the…
Replacing the Indicator Bulb on a Fiat 500
Replacing the Indicator Bulb on a Fiat 500
Fiat 500 (2007-2024 / 312) Replace the indicator bulb mounted in the (left front) lamp of a Fiat 500. Open the bonnet and secure it; locate the rear of the front lamp (indicato…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos