Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear lights on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light

In this tutorial we can see how to disassemble the rear lights in the Fiat 500, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then open the trunk door, locate the two bolts placed along the inner edge of the headlight in question and unscrew them using a 10mm socket wrench. Then grab the headlight, pull it towards you and separate it from the bodywork. At this point, all that remains is to disconnect the power connector, replace the faulty element and reassemble everything following the reverse procedure.

Posted on 2 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to turn on the fog lights or rear fog lights of the Fiat 500.
How to turn on the fog lights or rear fog lights of the Fiat 500.
Fiat 500 (2007-2022 / ) To turn on the fog lights and rear fog lights in the Fiat 500, we turn on the instrument panel, turn on the low beam lights, and to the right below t…
How to replace the rear lights on the Fiat 500 Abarth
How to replace the rear lights on the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial we will see how to remove and replace the original rear lights with those of the restyled version on the Fiat 500, also in the…
Replacement of the rear lights of the Fiat 500 Abarth
Replacement of the rear lights of the Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) In today's video tutorial we will see the instructions that will allow us to remove and replace the rear lights with those of the restyled version of…

Other guides you may be interested in

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos