Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to carry out the review of the gear lever with play in a Fiat 600

Model: Fiat Seicento MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Transmission

Video tutorial

If you have play in the Fiat 600 gear lever and want to fix it, the first thing to do is to check the movement of the lever. If you feel too much play or excessive movement, it could be a problem with the bearings or the mechanism adjustment.

To start, lift the hood and remove the panel under the gear lever. Then, check that the screws and joints are tight.

If necessary, lubricate the system to improve movement. If the play persists, there may be an issue with the supports or bearings that need to be replaced.

Finally, if you are unable to solve the issue, consult a mechanic for a more thorough inspection. This way, your gear lever will be as precise as it used to be! If you don't feel comfortable doing it yourself, contact a specialized workshop.


Posted on 5 April 2025 by ScegliAuto


Related tutorials

How to Remove the Coil Wires on a Fiat 600
How to Remove the Coil Wires on a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Are the coils on your Fiat 600 damaged and the car won't start? Here’s how to replace them on a Fiat 600. Pull the engine compartment release lever l…
Removing Cigarette Lighter Bulb from Fiat 600
Removing Cigarette Lighter Bulb from Fiat 600
Fiat Seicento (1998-2010 / MK 1) In this video, you will see how to replace the cigarette lighter bulb of the Fiat 600. First, remove the 25 Amp fuse to work safely. Start by removin…
How to Remove the Headrest from a Fiat 600
How to Remove the Headrest from a Fiat 600
Fiat Seicento (1998-2010 / MK 1) Before you start, sit in the back seat of your Fiat 600. In the headrest support slots, there are small holes. Begin by inserting a suitable tool int…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos