Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you install the tow hitch on a Fiat 500X?

Model: Fiat 500 500 X - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Accessory kit

See other generations:
Video tutorial

When it comes to installing a tow hook on a Fiat 500, inevitably we are talking about a Fiat 500X or a Fiat 500L, as the base model is unsuitable for towing. Although the Italian legislation has abolished the inspection of the tow hook at the MCTC for some years, it is still essential to drive with the declaration of correct installation "according to the rules" by an authorized workshop, in the dashboard of our car. This document must be available to be shown to the authorities in case of road checks, and otherwise there is a risk of a hefty fine and the withdrawal of the registration document, which will be returned when the work has been regularized.

Therefore, it is strongly advised against DIY installations.


Posted on 17 April 2025 by ScegliAuto


Related tutorials

How to Install Door Lights on the Fiat 500X
How to Install Door Lights on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) In today's video, see how to install door lights on the Fiat 500X. Specifically, these are plug & play units, making installation straightforward. Fi…
How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
How to Reset the Oil Light on the Fiat 500X
How to Reset the Oil Light on the Fiat 500X
Fiat 500 (2014-2022 / 500 X) If you own the new Fiat 500X with automatic transmission and want to learn how to correctly reset the engine oil light that stays on in the instrumen…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos