|
Do it yourself
| |||
| ||||
Timing belt replacement for the Fiat Ducato 2.3 88 Kw
Model: Fiat Ducato
MK 2
- Years 1993-2016
In this video we can see how to replace the timing belt of the engine of a Fiat Ducato 2.3 88 Kw. To be more understandable, it is a bench replacement. The spare parts codes are shown in the video, as it is sponsored by ContiTech. We need to remove the expansion tank, the windshield washer fluid reservoir, and the belt protection cover. We position the engine at top dead center of cylinder number 1, inserting the pins into the crankshaft and camshaft, as shown by the youtuber, showing us the correct assembly of them. Now we can loosen the tensioner pulley and remove the belt. In the illustrated case, we will also need to remove the sprocket from the fuel pump. In the kit we also find some gaskets, which have different functions depending on the color and size. After installing the new parts, it is time to reassemble the belt, which must be installed following the diagram that we can see in the video, following a counterclockwise direction, starting from the crankshaft pulley, which must be tensioned with great care, following the youtuber's instructions, who is a professional.
Posted on 5 May 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Ducato
(2006-2014 /
X250)
This guide provides key information on how and when to remove and replace the timing belt on the Fiat Ducato 2.3 Multijet; generally, for this type o…
Fiat Ducato
(1981-1993 /
MK 1)
The instructions in this guide will allow you to remove and replace the timing belt on the Fiat Ducato 2.5 D. First, open the engine cover of the veh…
Fiat Ducato
(2014-2026 /
X290)
Today, we will discover the main steps that illustrate the procedure for removing and replacing the timing belt on the Fiat Ducato Camper. To access …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.124
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |