Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the TPMS warning light on the 2012 Fiat Panda indicate?

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part:

The TPMS warning light indicates that it is necessary to check the tire pressure. When this light comes on in a 2012 Fiat Panda vehicle, we must proceed to check the pressure using a pressure gauge. After confirming that the pressure is not equal to that indicated by the manufacturer on the label, it is necessary to use an air compressor to inflate the tires. After inflating the tires, it will be necessary to reset the warning light. However, it is very important that the parameters correspond to the exact tire pressure, as incorrect pressure could cause the vehicle to swerve during driving and damage the tires.

Posted on 9 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning light on the Fiat Panda
Resetting the tire pressure warning light on the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) Below we will see the instructions that will allow us to reset the tire pressure warning light of the Fiat Panda; before performing the TPMS sensor r…
What Does the Yellow Triangle Warning Light with Exclamation Mark Mean in the Fiat Panda?
What Does the Yellow Triangle Warning Light with Exclamation Mark Mean in the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) If you have noticed the appearance of a yellow warning light depicting a triangle with an exclamation mark inside, but you are unsure what it means, …
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
How to Reset the Tyre Pressure Warning Light on the Fiat Panda 3
Fiat Panda (2012-2021 / ) In today's video, you will learn how to reset the tyre pressure monitoring system (TPMS) warning light on the Fiat Panda third series by following th…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos